Repair Tools and Other Materials Rear Crank Seal Sleeve Remover . . . . . . . . . JDG1020 Use to remove the rear seal assembly and seal housing. Tool helps protect the flange on rear of crankshaft. RG8513 –UN–13AUG99 JDG1020 OUO1004,0000BD0 –19–02NOV00–4/9 RG8510 –UN–20MAY98 Timing Gear Cover/Rear Seal Housing Oil Pan Rail Aligner . . . . . . . . . . . . . . . . . . . . . . . . . . . . JDG977 Use to align the timing gear cover to the engine block oil pan mounting surface and align the rear seal housing to the same surface.
When installing the timing gear seal housing, use JDG975 Timing Gear Cover/Rear Crankshaft Housing Centering Tool to center the seal housing bores with the crankshaft flange. JDG977 Continued on next page OUO1004,0000BD0 –19–02NOV00–6/9 CTM100 (06APR04) 05-170-17 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=391 Main Bearing Cap Puller/Installer . . . . . . . . . . . JDG996 Use to remove and install the main bearing caps. Due to wider bearing surface, these caps are installed with an increased interference fit. Y98 –UN–20MA RG8521 JDG996 OUO1004,0000BD0 –19–02NOV00–5/9 05 170 17