Repair Tools and Other Materials Front Timing Gear Cover/Rear Crankshaft Seal Housing Centering Tool . . . . . . . . . . . . . . . . . . . . . . . JDG975 Use to center the front/rear seal housing bore with the rear crankshaft flange during installation of the housing. This tool is also used to center the front timing gear cover seal housing bore with the front crankshaft flange during installation of the timing cover. Use with JDG977. RG8511 –UN–20MAY98 JDG975 OUO1004,0000BD0 –19–02NOV00–7/9 Front/Rear Crankshaft Seal Installer . . . . . . . .
JDG974A Use to install the front crankshaft seal on damper prior to damper installation and to install rear oil seal in rear seal housing when housing is on engine. RG8512 –UN–13AUG99 05 170 JDG974A 18 OUO1004,0000BD0 –19–02NOV00–8/9 Damper Puller/Installer . . . . . . . . . . . . . . . . . . JDG973 RG8509 –UN–13AUG99 Use to safely remove and install engine damper with engine in vehicle chassis. The damper weighs approximately 18 kg (40 lb) and is mounted with an interference press fit. JDG973 OUO1004,0000BD0 –19–02NOV00–9/9 Crankshaft, Main Bearings and Flywheel (Group 040) Service Equipment and Tools NOTE: Order tools according to information given in the U.S.
SERVICEGARD Catalog or from the European Microfiche Tool Catalog (MTC). Some tools may be available from a local supplier. CTM100 (06APR04) 05-170-18 P OWER T ECH 10.5 L & 12.5 L Diesel Engines SERVICEGARD is a trademark of Deere & Company Continued on next page OUO1004,0000BD1 –19–02NOV00–1/4 040604 PN=392