Delphi — Cylinder Head and Valves (Group 020) Specifications

Repair and General OEM Specifications Item Measurement Specification Intake and Exhaust Valve Springs Height at 0 N (0 lb-force) Free 67.9—72.1 mm (2.67—2.84 in.) (All) 2 Length Intake and Exhaust Valve Springs Height at 352—396 N (79—89 59.4 mm (2.34 in.) (R116585) lb-force) (Valve Closed) Intake and Exhaust Valve Springs Height at 845—935 N (190-210 45.5 mm (1.79 in.) (R116585) lb-force) (Valve Open) Intake and Exhaust Valve Springs Height at 527—593 N (118—133 59.4 mm (2.34 in.) (R133891) lb-force) (Valve Closed) Intake and Exhaust Valve Springs Height at 1187—1313 N (267—295 46.4 mm (1.83 in.) (R133891) lb-force) (Valve Open) Intake and Exhaust Valve Stems OD 8.999 ± 0.013 mm (0.3543 ± 0.0005 in.) Intake and Exhaust Valve Face 3 Maximum Runout 0.038 mm (0.0015 in.) Intake and Exhaust Valve Head OD 46.35—46.61 mm (1.825—1.835 in.) Intake and Exhaust Valve Face Angle 29.25 ° ± 0.25 ° 06 200 Cylinder Head Maximum Acceptable Out-of-Flat for 0.10 mm (0.004 in.) Entire Length of Head Maximum Acceptable Out-of-Flat for 0.025 mm (0.0009 in.) Every 305 mm (12.0 in.) 6 Cylinder Head (Rocker Arm New Part Thickness 124.975—125.025 mm (4.9203— Cover-to-Combustion Face) 4.9222 in.) Minimum Acceptable Thickness 124.840 mm (4.9150 in.) Cylinder Head (Rocker Arm Minimum Overall Thickness 124.840 mm (4.9150 in.) Cavity-to-Combustion Face) Cylinder Head Combustion Face Surface Finish 1.5—2.8 micrometers (60—110 Surface Finish (Surface Mill Only) micro-in.) (AA) 2 Free length of springs may vary slightly between springs.

3 Maximum runout measured at 44 mm (1.73 in.) diameter. CTM100 (06APR04) 06-200-6 P OWER T ECH 10.5 L & 12.5 L Diesel Engines Continued on next page OUO1004,0000BC6 –19–19SEP02–2/4 040604 PN=416