Delphi — Cylinder Head and Valves (Group 020) Specifications

CTM100 (06APR04) 06-200-7 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=417 Repair and General OEM Specifications Item Measurement Specification Cylinder Head Maximum Wave Height 0.008 micrometers (0.0002 micro-in.) Maximum Wave Width 2.0 micrometers (79 micro-in.) Valve Guide ID 9.102 ± 0.013 mm (0.3583 ± 0.0005 in.) Valve Stem OD 8.999 ± 0.013 mm (0.3543 ± 0.0005 in.) Valve Stem-to-Guide Clearance 0.077—0.129 mm (0.0030—0.0050 in.) Valve Guide Bore in Head ID 14.94 ± 0.02 mm (0.5882 ± 0.0008 in.) Valve Guide Installed Height 14.5—15.5 mm (0.57—0.61 in.) Valve Seat Grinding Contact Angle 30° Width 1.50—2.00 mm (0.059—0.079 in.) Maximum Runout 0.16 mm (0.006 in.) Intake and Exhaust Valve Seat Bore ID 49.424 ± 0.013 mm (1.9458 ± 0.0005 in.) Bore Depth 11.25 mm (0.443 in.) Radius at Lower Bore 0.64 ± 0.25 mm (0.025 ± 0.001 in.) Standard Intake and Exhaust Valve OD 49.487—49.513 mm (1.9483— Seat 1.9493 in.) Fuel Temperature Sensor Torque 10 N•m (7.5 lb-ft) Fuel Lines Torque 24 N•m (18 lb-ft) Cylinder Liner Height Above Block (Standout) 0.030—0.117 mm (0.0012—0.0046 in.) Cylinder Liner Max.

Height Difference at Nearest 0.051 mm (0.0020 in.) Point of Two Adjacent Liners or Within One Liner Cylinder Head4 Step 1—No. 17 Cap Screw Initial Torque 100 N•m (74 lb-ft) 4See INSTALL CYLINDER HEAD later in this group for proper torque sequence. Continued on next page OUO1004,0000BC6 –19–19SEP02–3/4 06 200 7