Delphi — Inspect and Measure Valve Springs

Cylinder Head and Valves CTM100 (06APR04) 02-020-25 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=97 Inspect and Measure Valve Springs IMPORTANT: Replacement valve springs (R133891) have higher working loads than older springs (R116585). Newer valve springs (R133891) have two green paint stripes –UN–04DEC97 for identification. Valve springs must be replaced in sets of two with new rotators. DO NOT intermix springs across valve bridges. RG2732 1. Inspect valve springs for alignment, wear, and damage. Valve Spring 2. Using D01168AA Spring Compression Tester, check valve spring tension. Compressed height must be within specification given below.

Specification Intake and Exhaust Valve Springs (All)1—Height at 0 N (0 lb-force) –UN–21MAY98 Free Length............................................. 67.9—72.1 mm (2.67—2.84 in.) Intake and Exhaust Valve Springs (R116585)—Height at 352—396 N (79—89 lb-force) (Valve Closed)......................................................................... 59.4 mm (2.34 in.) RG7427 Intake and Exhaust Valve Springs (R116585)—Height at 845—935 N (190-210 lb-force) (Valve Measuring Valve Spring Compression Open)............................................................................

45.5 mm (1.79 in.) Intake and Exhaust Valve Springs (R133891)—Height at 527—593 N (118—133 lb-force) (Valve Closed)......................................................................... 59.4 mm (2.34 in.) Intake and Exhaust Valve Springs (R133891)—Height at 1187— 1313 N (267—295 lb-force) (Valve Open)................................................................ 46.4 mm (1.83 in.) 1 Free length of springs may vary slightly between springs. RG,RG34710,76 –19–13AUG99–1/1 02 020 25