Cylinder Head and Valves Remove Valve Assembly NOTE: A small magnet may be used to aid removal of valve retainer locks (D). 02 020 1. Place cylinder head on a clean flat surface with combustion face down. 24 RG8305 –UN–06DEC97 2. Using JDG982 Valve Spring Compressor (A), compress valve spring far enough to remove retainer locks as shown. 3. Release spring tension, remove valve rotator (C) and valve spring (B). Removing Valve Springs 4. Remove valve stem seals (E) from valve guide tower. 5. Lay cylinder head on air intake side using a 1016 x 51 x 102 mm (40 x 2.0 x 4.0 in.) block of wood. 6. Remove valves and identify for assembly in same location.
RG8306B –UN–06DEC97 A—JDG982 Valve Spring Compressor B—Valve Springs C—Valve Rotators D—Valve Retainer Locks E—Valve Stem Seals Removing Valve Stem Seals RG,RG34710,75 –19–30SEP97–1/1 CTM100 (06APR04) 02-020-24 P OWER T ECH 10.5 L & 12.5 L Diesel Engines 040604 PN=96