John Deere 450DLC — Chipped Link Rails Diagnostic Procedure

TM2361 (24JUN08) 9020-15-5 450DLC Excavator Operation and Tests 062608 PN=633 Diagnostic Information 1 Machine Operating Condition Check Repair or replace cracked track link. See Track Chain Repair. (Group 0130.) or See Track Chain Remove and Install. (Group 0130.) Inspect worksite and interview machine operator. • Check if machine is operated on rough and rocky terrain. • Check if operator ever uses the slow speed (turtle) mode. Does operator understand how machine damage can be reduced? YES: Go to Track Shoe Width Check. NO: Instruct operator on the correct operating procedures of traveling in slow speed (turtle) mode on rough and rocky terrain.

See Operator’s Daily Machine Check Before Starting. (Operator’s Manual.) – – –1/1 2 Track Shoe Width Check Check machine and operating ground conditions. Are the narrowest shoes possible for required flotation being used? YES: Diagnostic procedure complete. NO: Install the narrowest shoes possible for required flotation. See Track Shoe Remove and Install. (Group 0130.) – – –1/1 9020 15 5 Chipped Link Rails Diagnostic Procedure – – –1/1 1 Track Sag Check Check track sag. See Check and Adjust Track Sag. (Operator’s Manual.) Is track sag within specification? YES: Diagnostic procedure complete. NO: Adjust track sag.

– – –1/1 2 Track Chain Check Inspect machine and worksite to determine cause of repeated high impacts of roller tread on flanges. Check machine for following: • Check track chain pitch specification, see Percent Worn Charts (SP326 Undercarriage Appraisal Manual.) • Check if machine has loose or snaky track. • Check if machine is operated on rough and rocky terrain. Are the correct track components installed on machine and do they meet specifications? YES: Go to Track Shoe Width Check. NO: Install correct track components to specifications. – – –1/1