John Deere 450DLC — Pilot System Diagram and Operation

TM2361 (24JUN08) 9025-05-5 450DLC Excavator Operation and Tests 062608 PN=643 Theory of Operation 17—Pump 1 Regulator 66—Pilot Signal Manifold 110—Bypass Shutoff Valve Y12—Pump 1 Control Solenoid 18—Pump 2 Regulator 81—Accumulator (4-spool) Valve 26—Charge Pump 82—Pilot Check Valve 121—Arm Reduced Leakage Y13—Pump 2 Control Solenoid 27—Pilot Pump Manifold Valve—Switch Valve Valve 29—Fan Drive Pump Regulator 83—Right Control Valve 129—Boom Mode Relief Y14—Fan Drive Pump 47—Hydraulic Oil Tank 84—Left Control Valve Control Valve Solenoid Valve 50—Suction Screen 85—Main Relief and Power 149—Swing Motor Y22—Boom Flow Rate 52—Pilot Filter Element Digging Valve 154—Swing Park Brake Solenoid Valve (SF) 54—Pilot Pressure Regulating 89—Travel Flow Combiner Release Y23—Boom Mode Relief Valve Valve 157—Left Travel Motor Solenoid Valve (SC) 55—Solenoid Valve Manifold 97—Boom Flow Rate Control 159—Right Travel Motor Y24—Power Dig Solenoid 56—Travel Pilot Control Valve Valve—Switch Valve 190—To Control Valve Pilot Valve (SG) 57—Left Pilot Control Valve 102—Boom Reduced Leakage Caps Y25—Travel Speed Solenoid 58—Right Pilot Control Valve Valve—Switch Valve Y10—Pilot Shutoff Solenoid Valve (SI) 59—Boom Up Shockless Valve 105—Arm 2 Flow Rate Control Valve Valve—Switch Valve The pilot system is used to operate the control circuits facilitate the functioning of the arm reduced leakage of the machine.

The pilot pump (27) is mounted on the valve (121) and the boom reduced leakage valve end of main hydraulic pump 1. Oil is drawn from the (102). hydraulic tank (47) by the charge pump (26). This charge oil is then drawn into the pilot pump and out to The pilot oil continues on to the pilot check valve the pilot filter (52) and pilot pressure regulating valve manifold (82), where it is divided off to the accumulator (54). (81), the pilot signal manifold (66), and the pilot shutoff solenoid valve (Y10).

From the pilot shutoff solenoid The filtered oil then flows to the fan drive pump valve, pilot oil flows to the travel pilot control valve solenoid (Y14), fan drive pump regulator (29), pump 1 (56), left pilot control valve (57), right pilot control valve regulator (17), pump 2 regulator (18), pump 1 control (58), and to the pilot signal manifold’s warm-up circuit. solenoid valve (Y12), and pump 2 control solenoid valve (Y13). Pilot oil from the right pilot control valve flows through the boom up shockless valve (59) to the pilot signal From the filter, oil is also routed to the solenoid valve manifold.

Pilot oil from the pilot signal manifold flows to manifold (55), which controls power dig (SG), travel the swing park brake release (154) of the swing motor speed (SI), boom flow rate (SF), and boom mode relief (149) and to the control valve pilot caps (190). (SC). Pilot oil is routed directly to the control valve to LD30992,000024F –19–26APR06–2/2 9025 05 5