John Deere 450DLC — Pilot Pump, Pressure Regulating Valve, and Filter Operation

TM2361 (24JUN08) 9025-05-6 450DLC Excavator Operation and Tests 062608 PN=644 Theory of Operation Pilot Pump, Pressure Regulating Valve, and Filter Operation –UN–17MAR06 TX1004868 Pilot Pump, Pressure Regulating Valve and Filter 1—Pilot Pump 6—Return Oil to Hydraulic 9—Regulated Pilot Oil to 13—Shim(s) 2—Drive Gear Return Manifold Solenoid Valve Manifold 14—Spring 3—From Hydraulic Pump 7—Pilot Filter Bypass Valve 10—Test Port 15—Orifice 9025 05 6 Suction Line 8—Pilot Pressure Regulating 11—Filter Element 4—Drive Gear Valve 12—Pilot Pressure Regulating 5—Regulated Pilot Oil to Valve Spool Hydraulic Pump Pilot filter and pilot pressure regulating valve are Pilot pressure regulating valve spool is a bypass flow incorporated into one assembly.

regulating valve and is used to regulate pilot oil pressure in pilot oil circuit. Pilot oil flows through an Pilot filter bypass valve (7) will sense differential orifice (15) to the end of pilot pressure regulating valve pressure between inlet side and outlet side of filter spool. When pressure in pilot circuit increases to element (11). During normal operation, the bypass pressure setting of spring (14), the spool will push valve is held closed by a spring as oil flows through against the spring. Regulated pilot oil flows from port filter element (11) to pilot pressure regulating valve (8).

PD to solenoid valve manifold (9) and from port PC to If filter element becomes plugged, pressure on inlet pump servo pistons and regulators. Oil is not needed side increases, forcing bypass valve open. Pilot oil will to maintain pressure in pilot circuit. Oil flows out port now bypass the filter element, and unfiltered oil will TA to hydraulic return manifold (6). flow to the pilot pressure regulating valve spool (12). LD30992,0000250 –19–31MAR06–1/1