John Deere 450DLC — Pilot Signal Manifold Operation

TM2361 (24JUN08) 9025-05-24 450DLC Excavator Operation and Tests 062608 PN=662 Theory of Operation Actuated Function To Shift Pilot Valve Four Outputs of Pilot Signal Manifold Output Input Number 1 Input Number 2 Travel Flow Any Dig or Swing Right Travel Combiner (SL) Function Arm 2 Flow Rate Arm In Boom Up Control (SK) Pilot Valve Flow Arm In Swing Rate Control (SE) Release Swing Any Dig or Swing Function Brake (SH) Pump 1 Flow Rate Right Travel, Boom, Arm Control (SA) Pump 2 Flow Rate Left Travel, Boom, Arm, Swing Control (SB) Warm-Up Circuit Operation.—When the pilot control shutoff valve is in the LOCK position and the engine is running, pilot oil flows from the pilot control shutoff valve port HT to the pilot signal manifold port PH.

The oil is heated as it flows through an orifice at the inlet to manifold. The warm-up oil from pilot control shutoff valve flows through the warm-up oil passage, through the check valves and out to the left and right pilot controllers and top pilot caps on the control valve to warm the pilot circuit. At the pilot controllers, the warm-up oil flows through the pilot controllers, out the return port, through the pilot control shutoff valve port T4 to the hydraulic oil tank. At the pilot caps, warm-up oil flows through orifices into a return passage in the pilot caps and then to the hydraulic oil tank.

Function and Pilot Signal Manifold Ports Pump 1 Flow Rate Pilot Valve Pump 2 Flow Rate Pilot Valve Travel Flow Combiner Valve Pilot Valve Pilot Valve (port SE) Swing Park Brake Release Pilot Valve Arm 2 Flow Rate Pilot Valve Boom Up, A X X X X Boom Down, B X X X Arm In, D X X X Arm Out, C X X X Bucket Curl, G X X Bucket Dump, H X X Right Swing, X X X F Left Swing, E X X X Right Travel, L, K X X Left Travel, I, J X Auxiliary, 9025 05 24 X X N, M There are six outputs of the pilot signal manifold other than providing passages for pilot oil to shift control valve spools.

MM61211,0001519 –19–16MAY08–10/10 N, M X X Four Outputs of Pilot Signal Manifold Output Input Number 1 Input Number 2 Travel Flow Combiner (SL) Any Dig or Swing Function Right Travel Arm 2 Flow Rate Control (SK) Arm In Boom Up Pilot Valve Flow Rate Control (SE) Arm In Swing Release Swing Brake (SH) Any Dig or Swing Function Pump 1 Flow Rate Control (SA) Right Travel, Boom, Arm Pump 2 Flow Rate Control (SB) Left Travel, Boom, Arm, Swing