TM2361 (24JUN08) 9025-15-14 450DLC Excavator Operation and Tests 062608 PN=764 Diagnostic Information 1 Pilot Cap Check See Control Valve Disassemble and Assemble. (Group 3360.) Inspect pilot cap for leakage or damage. Check torque on attaching cap screws. Do is pilot cap free of leaks and attaching cap screws torqued? YES: Go to Pilot Control Valve Check. NO: Repair or replace control valve components as necessary. See Control Valve Disassemble and Assemble. (Group 3360.) – – –1/1 2 Pilot Control Valve Check Inspect pilot control valve or hydraulic hoses for function that can not be operated. Check for leaks or damage. Are components free of damage? YES:
Go to Pump 1 or Pump 2 Flow Rate Pilot Valve Check NO: Inspect, repair or replace pilot control valve. See Pilot Control Valve Disassemble and Assemble. (Group 3360.) NO: Inspect, repair or replace hydraulic line. – – –1/1 3 Pump 1 or Pump 2 Flow Rate Pilot Valve Check See Pilot Signal Manifold Operation. (Group 9025-05.) Inspect pump 1 or pump 2 flow rate pilot valves. Do flow rate pilot valve spools move freely? YES: Go to Control Valve Spool Check. NO: Repair or replace pilot signal manifold flow rate pilot valve spool. See Pilot Signal Manifold Disassemble and Assemble. (Group 3360.) – – –1/1 9025 15 14 4 Control Valve Spool Check See Control Valve Disassemble and Assemble.
(Group 3360.) Inspect control valve spool for sticking. Does control valve spool move freely? YES: Diagnostic procedure complete. NO: Repair or replace control valve components as necessary. See Control Valve Disassemble and Assemble. (Group 3360.) – – –1/1