John Deere 450DLC — Left Travel Does Not Move During Single Travel Operation Diagnostic Procedure

TM2361 (24JUN08) 9025-15-39 450DLC Excavator Operation and Tests 062608 PN=789 Diagnostic Information 3 Pump 2 Delivery Pressure Check Key on, use monitor service menu to display Pump 1 or Pump 2 Delivery Pressure. See Monitor Service Menu Operation. (Group 9015-16.) Monitor pump 2 delivery pressure on monitor while doing all hydraulic functions except right travel and bucket. Does pump 2 delivery pressure change when control lever is moved? YES: Go to Pump 2 Control Pressure Check. NO: Go to Left Travel Check. – – –1/1 4 Left Travel Check See System Functional Schematic, Wiring Diagram, and Component Location Master Legend.

(Group 9015-10.) Switch pump 2 delivery sensor with pump 1 delivery sensor. Is does left track now move? YES: Replace pump 2 delivery sensor. NO: Flow check pump 2. Perform Pump Flow Test. (Group 9025-25.) – – –1/1 5 Pump 2 Control Pressure Check Key on, use monitor service menu to display Pump 2 Control Pressure. See Monitor Service Menu Operation. (Group 9015-16.) Jack up left track so track is free to rotate without ground resistance. Monitor pump 2 control pressure on monitor while fully engaging left track control lever. Does the control pressure change when travel control lever is moved? YES: Go to Pump 2 Pressure Sensor Swap Check. NO: Replace pump 2 regulator.

– – –1/1 9025 15 39 6 Pump 2 Pressure Sensor Swap Check See System Functional Schematic, Wiring Diagram, and Component Location Master Legend. (Group 9015-10.) Switch pump 2 regulator sensor with pump 1 regulator sensor. Fully engaging left track control lever. Is does left track now move? YES: Replace regulator pressure sensor. NO: Go to Pump 2 Control Solenoid Valve Check. – – –1/1