TM2361 (24JUN08) 9025-15-53 450DLC Excavator Operation and Tests 062608 PN=803 Diagnostic Information 4 Servo Piston Shuttle Valve Check See Park Brake Valve Housing Disassemble and Assemble. (Group 0260. Inspect servo piston shuttle valve. Does shuttle valve operate correctly? YES: Go to Travel Motor Leakage Check. NO: Repair or replace motor swash plate angle control. See Travel Motor Cover Disassemble and Assemble. (0260.) – – –1/1 5 Travel Motor Leakage Check Check tracking while descending a hill. Perform Travel System Tracking Check. (Group 9005-10.) If tracking does not meet specification, check travel motor leakage. Perform Travel Motor Leakage Test.
(Group 9025-25.) If tracking is within specification when descending a hill, but not when on the level or going up hill, travel motor leakage is indicated. Does tracking and motor leakage meet specification? YES: Go to Rotary Manifold Leakage Check. NO: If travel motor leakage does not meet specification, repair or replace travel motor. See Travel Motor and Park Brake Disassemble and Assemble. (Group 0260.) – – –1/1 6 Rotary Manifold Leakage Check Perform Rotary Manifold Air Test. (Group 0260.) Inspect rotary manifold for leakage. Is rotary manifold OK? YES: Go to Pump 1 or Pump 2 Regulator Check. NO: Repair or replace rotary manifold. See Rotary Manifold Disassemble and Assemble.
(Group 0260.) – – –1/1 9025 15 53 7 Pump 1 or Pump 2 Regulator Check Perform Pump Regulator Test and Adjustment—Minimum Flow. (Group 9025-25.) Perform Pump Regulator Test and Adjustment—Maximum Flow. (Group 9025-25.) Test pump 1 or pump 2 regulators. Does pump 1 or pump 2 regulator meet specification? YES: Diagnostic procedure complete. NO: Repair or replace pump 1 or pump 2 regulator. See Pump Regulator Disassemble and Assemble. (Group 3360.) – – –1/1