Diagnostic Information Combined Travel And Dig Functions Slow Or No Power Diagnostic Procedure –1/1 TM2361 (24JUN08) 9025-15-56 450DLC Excavator Operation and Tests 062608 PN=806 1 Travel Flow Combiner Valve Check See Pilot Signal Manifold Disassemble and Assemble. (Group 3360.) Inspect travel flow combiner pilot valve (SL) in pilot signal manifold for stuck spool. See Travel Flow Combiner Valve Operation. (Group 9025-05.) Inspect travel flow combiner valve. See Control Valve Disassemble and Assemble. (Group 3360.) Is travel flow combiner valve circuit OK? YES: Go to Control Valve Check. NO: Repair or replace travel flow combiner valve circuit components.
– – –1/1 2 Control Valve Check See Control Valve Operation. (Group 9025-05.) Inspect for stuck travel valve spool in control valve. For component location, Does travel valve spool move freely? YES: Go to Travel Is “Jerky” Diagnostic Procedure. (Group 9025-15.) NO: Repair or replace control valve components as necessary. See Control Valve Disassemble and Assemble. (Group 3360.) – – –1/1 9025 15 56 Travel Is “Jerky” Diagnostic Procedure – – –1/1 Track Sag Check Check track sag. See Check and Adjust Track Sag. (Operator’s Manual.) Is track sag within specification? YES: Go to Track Roller Check. NO: Adjust track sag. – – –1/1 Track Roller Check See Disassemble and Assemble Track Roller.
(Group 0130.) Inspect rollers oil level. Is oil level to specification? YES: Go to Travel Park Brake Check. NO: Add oil as required. – – –1/1