John Deere 450DLC — Hydraulic Oil Warm-Up Procedure

TM2361 (24JUN08) 9025-25-5 450DLC Excavator Operation and Tests 062608 PN=865 Tests 1. Connect one of the following test equipment to perform Monitoring test: Pump 1 Delivery Pressure 0.00 MPa Pump 2 Delivery Pressure 0.00MPa 1. SERVICE ADVISOR application. See SERVICE Hydraulic Oil Temperature 0 oC ADVISOR Connection Procedure for instruction. Actual Engine Speed --------min-1 (Group 9015-20.) –19–03MAR06 Access Hydraulic Warm-Up. ON Or select the following items from the menu: 1 2 3 4 5 • Coolant Temperature • Hydraulic Oil Temperature 6 7 8 9 0 TX1003295 F1 F2 F3 F4 • Actual Engine Speed 2. See Personal Digital Assistant (PDA) Connection To Monitor Excavator Using Dr.

ZX Application for instruction. (Group 9015-20.) Select the following items from the Monitor Display: • Coolant Temperature • Hydraulic Oil Temperature • Actual Engine Speed 3. See Monitor Service Menu Operation for instruction to actuate the service menu on monitor in cab. (Group 9015-20.) Select the following items from Monitoring list: • Coolant Temperature • Hydraulic Oil Temperature • Actual Engine Speed CAUTION: Avoid possible serious injury from machine movement during warm-up procedure. Clear the area of all bystanders before doing the warm-up procedure. 2. Clear the area of all bystanders to allow for machine movement. 3. Start engine.

Run engine at approximately 1/2 speed for approximately 5 minutes before operating any functions. SERVICE ADVISOR is a trademark of Deere & Company Continued on next page TX04577,00000E7 –19–05JUN06–2/4 9025 25 5