TM2361 (24JUN08) 9025-25-37 450DLC Excavator Operation and Tests 062608 PN=897 Tests Circuit Relief Valve Test and Adjustment SPECIFICATIONS Hydraulic Oil Temperature 45—55°C 110—130°F Engine Speed 1300 rpm approximate Work Mode Switch Position Dig Mode Power Mode Switch Position HP (High Power) Mode Auto Idle Switch Position Off Boom Mode Switch Position Off Boom, Arm, and Bucket Circuit 35.3—36.3 MPa Relief Valves Pressure 35 300—36 300 kPa 353—363 bar 5120—5260 psi Auxiliary Circuit Relief Valve (Top 35.3—36.3 MPa Work Port) Pressure 35 300—36 300 kPa 353—363 bar 5120—5260 psi Auxiliary Circuit Relief Valve 27.9—28.9 MPa (Bottom Work Port) Pressure 27 900—28 900 kPa 279—289 bar 4045—4190 psi Circuit Relief Valve Adjusting 5 MPa approximate per 1/4 turn Screw Pressure Change 5000 kPa approximate per 1/4 turn 50 bar approximate per 1/4 turn 725 psi approximate per 1/4 turn Adjusting Screw-to-Circuit Relief 31.5 N•m Valve Cartridge Nut Torque 23 lb-ft SERVICE EQUIPMENT AND TOOLS JT02156A Digital Pressure/Temperature Analyzer JT02160 Transducer, 70 000 kPa (700 bar) (10,000 psi) 4200465 (1/4 M BSPP ORB x 7/16-20 M 37°) Adapter 70 000 kPa (700 bar) (10,000 psi) Gauge 19 mm Combination Wrench 6 mm Hex Key Wrench The purpose of circuit relief valves is to relieve high pressure spikes caused by external forces when functions are in neutral.
Circuit relief valves also limit circuit pressures when power digging is actuated. The relief valves are checked and adjusted to specification to protect components from damage.
Continued on next page LD30992,0000281 –19–15MAY08–1/5 9025 25 37 SPECIFICATIONS Hydraulic Oil Temperature 45—55°C 110—130°F Engine Speed 1300 rpm approximate Work Mode Switch Position Dig Mode Power Mode Switch Position HP (High Power) Mode Auto Idle Switch Position Off Boom Mode Switch Position Off Boom, Arm, and Bucket Circuit Relief Valves Pressure 35.3—36.3 MPa 35 300—36 300 kPa 353—363 bar 5120—5260 psi Auxiliary Circuit Relief Valve (Top Work Port) Pressure 35.3—36.3 MPa 35 300—36 300 kPa 353—363 bar 5120—5260 psi Auxiliary Circuit Relief Valve (Bottom Work Port) Pressure 27.9—28.9 MPa 27 900—28 900 kPa 279—289 bar 4045—4190 psi Circuit Relief Valve Adjusting Screw Pressure Change 5 MPa approximate per 1/4 turn 5000 kPa approximate per 1/4 turn 50 bar approximate per 1/4 turn 725 psi approximate per 1/4 turn Adjusting Screw-to-Circuit Relief 31.5 N•m Valve Cartridge Nut Torque 23 lb-ft SERVICE EQUIPMENT AND TOOLS JT02156A Digital Pressure/Temperature Analyzer JT02160 Transducer, 70 000 kPa (700 bar) (10,000 psi) 4200465 (1/4 M BSPP ORB x 7/16-20 M 37°) Adapter 70 000 kPa (700 bar) (10,000 psi) Gauge 19 mm Combination Wrench 6 mm Hex Key Wrench