John Deere 450DLC — Pump Flow Test

TM2361 (24JUN08) 9025-25-69 450DLC Excavator Operation and Tests 062608 PN=929 Tests Pump Flow Test SPECIFICATIONS SERVICE EQUIPMENT AND TOOLS Hydraulic Oil Temperature 45—55°C Flowmeter, 380 L/min (100 gpm) 110—130°F JT03452 Split Flange Connector Plate Kit Engine Speed Fast Idle -16 Hose with -16 Split Flange Connector, Code 62 Work Mode Switch Position Dig Mode JT03391 Plug (9/16-18 M 37°) Power Mode Switch Position P Mode JT02156A Digital Pressure/Temperature Analyzer Auto Idle Switch Position Off JT02160 Transducer, 70 000 kPa (700 bar) (10,000 psi) Pump 1 or Pump 2 Flow 360.0 L/min at 13.8 MPa and 4200465 (1/4 M BSPP ORB x 7/16-20 M 37°) Adapter Rate—New 1850 rpm 360.0 L/min at 13 790 kPa and 70 000 kPa (700 bar) (10,000 psi) Gauge 1850 rpm 360.0 L/min at 137.9 bar and NOTE:

Flow rate specification given is for one pump. 1850 rpm 95.1 gpm at 2000 psi and 1850 Test is used to determine pump condition and should rpm be performed only if a comparison of actual machine Pump 1 or Pump 2 Flow 348.6 L/min at 20.7 MPa and cycle times to specified cycle times indicates low pump Rate—New 1850 rpm 348.6 L/min at 20 685 kPa and flow. See Cycle Times Check. (Group 9005-10.) 1850 rpm 348.6 L/min at 206.8 bar and 1. Release pressure from hydraulic oil tank by pushing 1850 rpm pressure release button on top of hydraulic oil tank. 92.1 gpm at 3000 psi and 1850 rpm 2.

Connect a vacuum pump to hydraulic oil tank to Pump 1 or Pump 2 Flow 305.9 L/min at 13.8 MPa and minimize oil loss.

Rate—Minimum Allowable 1850 rpm 305.9 L/min at 13 790 kPa and 1850 rpm 305.9 L/min at 137.9 bar and 1850 rpm 80.8 gpm at 2000 psi and 1850 rpm Pump 1 or Pump 2 Flow 294.5 L/min at 20.7 MPa and Rate—Minimum Allowable 1850 rpm 294.5 L/min at 20 685 kPa and 1850 rpm 294.5 L/min at 206.8 bar and 1850 rpm 77.8 gpm at 3000 psi and 1850 rpm Continued on next page LD30992,000028A –19–05JUN06–1/5 9025 25 69 SPECIFICATIONS Hydraulic Oil Temperature 45—55°C 110—130°F Engine Speed Fast Idle Work Mode Switch Position Dig Mode Power Mode Switch Position P Mode Auto Idle Switch Position Off Pump 1 or Pump 2 Flow Rate—New 360.0 L/min at 13.8 MPa and 1850 rpm 360.0 L/min at 13 790 kPa and 1850 rpm 360.0 L/min at 137.9 bar and 1850 rpm 95.1 gpm at 2000 psi and 1850 rpm Pump 1 or Pump 2 Flow Rate—New 348.6 L/min at 20.7 MPa and 1850 rpm 348.6 L/min at 20 685 kPa and 1850 rpm 348.6 L/min at 206.8 bar and 1850 rpm 92.1 gpm at 3000 psi and 1850 rpm Pump 1 or Pump 2 Flow Rate—Minimum Allowable 305.9 L/min at 13.8 MPa and 1850 rpm 305.9 L/min at 13 790 kPa and 1850 rpm 305.9 L/min at 137.9 bar and 1850 rpm 80.8 gpm at 2000 psi and 1850 rpm Pump 1 or Pump 2 Flow Rate—Minimum Allowable 294.5 L/min at 20.7 MPa and 1850 rpm 294.5 L/min at 20 685 kPa and 1850 rpm 294.5 L/min at 206.8 bar and 1850 rpm 77.8 gpm at 3000 psi and 1850 rpm