Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION 13. Inspect tires. WARNING 14. Inspect rims. WARNING 3 - 70 8. Check dump body Check for any cra cks, embedded foreign objects, or l 9. Check for damage to handrail, loose bolts Repair any damag e and tighten any loose 0. Check for damage to gauges, lamps on th e instrume nt panel and Check for damage to the panel, gauges an d lamps. If any problem i s found, repl ace the parts. Clean off any dirt on the surface. Ti 1. Check rear view m irror, under view mirror Check that the mir rors are not damaged. Replace the m if they are damaged.

C lean the surface of the mirrors and adjust the ang le so that the operator ca n see the a rea to the rea r and under t he machine from the operator's seat. 2. Check for damage to the seat belt and mo unting clam ps. If damages are found, replace with the new one. he equipment to the machine. Tighten any loose bolts. Check for damage Check for any l If the seat belt is belt immediatel Check for damage to seat belt and mounti ng clamps. If damages are found, re place with the new o Check for any l oose bolts of the clamps mounting t he equipmen t to the mac hine.

Tighten any lo If the seat belt is scratched or frayed, if a ny fittings a re broken or deformed fro m long service, repla ce the seat y. worn or damaged tires are used, they may burst an d cause serio us injury r death. use the following tires. oves of less than 15% of that of a new tire even wear or with stepped-type wear at has reached the cords, or with cracks in the d cords arated) surface ead repaired tubeless tires d or abnormally damaged tires, which do not o ensure safety, do not ear: Tires with a tread gro oves of less than 15% of th at of a new ti Tires with extreme un even wear or with stepped- amage:

Tires with damage th rubber Tires with cut or pulle Tires with peeled (sep Tires with damaged b Leaking or improperly Deteriorated, deforme seem usable heck the rims (wheels) and rings for deformation, corrosion an d cracks. particular, check the s ide rings, lock rings and ri m flanges tho roughly.