. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING up to the FULL mark. 3 - 71 CHECK BEFORE STA Perform the contents of th is section before starting the work of each In norm al situations, do no t open the ra diator cap. Whe n checking the coolant level, wait for the engin e to cool down and check using t he reserve tank. Immedi ately after the engi ne is stoppe d, the coolant is at high te mperature and the radiator is unde r high internal pressure. If you o pen the cap in this condition, y ou will suffer bur ns. Alway s wait for the temperature to go dow n, turn the cap slowly to release the pressure, then remove the cap carefully. 1.
Open the engine hoo d and chec k that the cool ant in reservoir tank (1) is between th e FULL an d LOW marks. 2. If the level is LOW, re move cap (2) and add the engine coolant 3. If the re is n o coolant in the reservoir tank, ad d water t o the radia add tor through wate r filler (3) a op then water to the reser voir tank. 4. Chec engin probl 5. After adding coolant, t ighten the cap 6. If mo ormal leaka