Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING the engine is stopped and may cause serious burns. Wait for the oil 3 - 73 Parts temperature to go do wn before perfo rming this operatio 1. Open t he engin e hood cover and check the oil level with the pstick (G) and wipe off the oil with cloth. 2. dipstic Take o k (G). ut the di 3. 4. Fully in The oil sert dips level sh tick (G) into f ould be betwe iller pipe, then re en the H and L m move it. arks on dipstick ( I ( G). f the o F). il level is below the L mark, add oil through oil filler port 5.

I f the o il level is above the H mark, open the u nderguard o f the engine , remove drain plug ( 1), and loosen d rain valve ( drain t he exces sive oil, and t hen check the oil level again f the o secure REMARK When c hecking the oil level a fter the engine ha s been operated, wait for at least 15 m inutes after the engine is stopped before checking the oil level. set the machine horizontal before checking the oil level. If the m achine is at an angle, set the machine horizontal b efore checking the oil level.