Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION (G). 2. If the oil level is low, add oil through oil filler port (F). NOTICE The oil level changes according to the oil temperature, so check the oil level after completing the warming-up operation. CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING fuel. 3 - 74 CHECK OIL LEVEL IN TRANSMISSION CASE, A 1. Aft er starting the engine, run it at low idlin el using the " ale on sight gauge Durin g operations o r when idling t he engine after operations, che ck the vel using the " If the oil filler cap is re moved without releasing the i nternal pressur e, oil will spurt out, so turn the oil filler cap slowly to release the inter nal pressure, t hen remove it carefully. 1.

Ch eck with sight gauge (G1). 2. If th e oil level do es not reach t he window of gauge (G1), a dd oil thr ough oil filler ( F). 3. Wh en checking t he oil level af ter adding oil, check with di pstick (G2 Th If th (F). ). e oil should be between the H and L mar ks on dipstick (G2). e oil level is below the L mark, add oil through oil filler port DRAIN WATER, SEDIMENT FROM FUEL TANK Loosen valve (1) at t he bottom of the fuel tank, and drain the water and se diment collec ted at the bot tom of the tan k together wi th the