Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK FUEL LEVEL, ADD FUEL WARNING the tank. Fuel tank capacity: 384 liters (101.45 US gal) 3. After adding fuel, tighten the cap securely. REMARK that wheel. 3 - 75 When adding fuel, be c areful not to let the fuel overflow. The fuel may cause f ire. Always wipe up If fuel spills onto dirt an d sand sticking to the machine, r emove it and dir t and Since fuel is flammable and dangerous, do not bring fire near it. ge (1) on the machine monito r. erations, add fuel through fuel filler (F) t If the breather hole i n the cap is clogged, the p ressure insi de the tank will go down and this may cause the fue revent this, clean the breathe r hole fr om tim e to time.

To prevent air from being sucked into the engine, always p ay careful attention to the fu CHECK WHEEL HUB BO LTS, TIGHTEN Check for loose wheel h ub bolts (1). If any are found, t ighten th Tightening torque: 824 to 1030 Nm o 105 kgm, 607.6 to 759.5 lbft) (84 t o 105 kgm, 607.6 to 759. 5 lbf Insert a socket wrench i n a pipe, then apply a forc e of 932N {95 at a point 1 meter from the fulcrum. This will give a tighte m, 687.1 lbft}. ive torque of 932Nm {95 kg When tightening the hu b bolts after replacing the tires , travel f to 6 km, then check the tightening torque to ensure t hat there no loose bolts. If any wheel hub bolt is broken, replace all the wheel hub bolt