Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK BRAKING EFFECT CHECK EMERGENCY STEERING WARNING Check manual emergency steering 1. Turn starting switch key to the ON position. 2. Turn emergency steering switch (1) ON, turn the steering wheel, and check that the steering can be operated. If the steering is not operated when the steering wheel is turned, please ask your Komatsu distributor to carry out inspection. Check auto-emergency steering 1. Turn the starting switch key to the START position and start the engine. 2. Check that the brake oil pressure caution lamp is OFF, then pull retarder control lever (2) fully and stop the engine. 3. Turn starting switch key to the ON position. 4.

Set parking brake switch (3) to "TRAVEL", and check that the emergency steering motor is actuated after 1 second, and that the steering is operated when the steering wheel is turned. 3 - 76 CHECK CENTRAL WARNING LAMP, ALARM BUZZER, MONITOR LAMPS AND METERS Before starting the engine, turn the starting switch to the ON position and check that th e machine monitor does as follows. If t he machine monitor does no t work, there is probably a failure in the machine monitor system, so please ask your Komatsu distributor to carry ou t inspection. The central warning lamp li ghts up for 2 seconds, then goes out. r 2 seconds, then stops.

The alarm buzzer sounds fo The machine monitor lamp lights up for 2 seconds and then goes out for 1 second. The shift indicator displays "88" for 2 seconds, then goes out for 1 second. ons after the system is checked for 3 seconds. ays "KOMATSU" for 3 seconds. The meters start the operati The character display displ Check if the braking capacity o If any abnormality is found, as Do not continue to use the emerge ncy steering pump for more than 90 seconds. If the emergency steering is used continuously for more than 90 seconds, there is danger that the pump may burn out or be damaged, or that it may cause a fire.