Komatsu — METHOD OF LOWERING DUMP BODY IN EMERGENCY

. OPERATION TROUBLESHOOTING IF TRANSMISSION HAS TROUBLE at a safe place. lever is operated. In this case, perform the following procedure. 1) When the While the emergency escape function is actuated, the machine monitor shift indicator displays "E" and the transmission shift range in turn. 3 - 126 If the transmission ha s any trouble, operate the ma to the following proc 1. Use the foot brak e to reduce the speed and st 2. Set the gear shif he PARKING position. 3. In some trouble modes, the gear is not shifted even if the arting switch is at the ON pos ition or the engine is star ted, disconnect (p ull out) emergency ) (No.

A1 (female), A1 (male), white 1-pin connector), th en connect (insert ng brake switch to the TRAVE L position. gear shift lever to move the m achine to a safe pla ce with out depressing the accelerator pedal. If the gear shift lever i s operated with the accelerato r pedal depressed, the em ergency escape fu nction will not work. In addition, the emer gency escape function may n ot work for some fa ilure c odes. METHOD OF LOWERING DUMP BODY IN EMERGENCY When the dump bod engine cannot be st procedure. 1. Remove cover (2 ) from the rear of hydraulic ta 2. Loosen locknut ( 3. Turn grip (5) of v 4) of manual lower valve (3). alve (3) counterclockwise. 4.

Tighten grip (5) a nd locknut (4) and install cov please consult your Komatsu distributor.