. MAINTENANCE SERVICE PROCEDURE CLEAN OUTER ELEMENT WARNING 1. Stop the engine. 2. Remove 6 hooks (5) from dust cap (4), then cap. move it up and 4 - 21 Dirt will fly if compress ed air is used for cleaning. If dirt gets into your eye s it may cau se blindness, an d if you breathe in the dust it may damage yo equipment. problems wea When pulling out the ai r cleaner element, make sure that you are standing on a firm pla ce. If your footin g is not secure when you carry out the opera tion, there is danger of fallin g and suffering injury. NOTICE Clean only the outer eleme nt. Do not remove the inner element.
If t he i nner e lement is rem oved while the o uter element is being cleaned, dirt may enter th e engine and cause damage t o the engine . remove the dust 3. down and to the lef t and right while pulling it 4. Hold inner element (7) so that it does not com e out, and clean the inside of the air cleaner body with a dry c 5. Use a dry cloth or c ompressed air to clean of f the dirt stuck to dust cup (4) and va cuator valve (8). 6. Check that there ar e no cracks in the lip of th e vacuator valve (8). If any cracks a re found, replace with a n ew part. NOTICE If a damaged element i s used, air will pass the air c leaner filter and will b e sucked int o the engine.
Ne ver use any cle aning method that will damag e the element. If the elemen t is damaged , replace it with a new Never tap or hit the ele ment against any other objec t when cleaning it. Do not use an element with damaged folds or a dam aged gasket or