Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE cup (4) is at the 4 - 22 7. Blow dry compressed air (0.69 MPa {7 kg/cm 2}) from t he inside of outer e lement (6) alon g the folds. N ext, blow along th e folds from the outside, then bl ow again fro m the inside. 8. After cle aning, shine a li ght bulb from inside outer element (6) to check the outer ele 9. Install ou ter element (6) in the air cleaner body 10. Check th at O-ring (9) is fitted to dust cup ( 4). Next, se t so that vacua tor valve (8) of dust bottom, and insert it into the air clean er body 11. Fit 6 hoo ks (5) of dust c ap (4) to the p rotruding parts of the air cleaner b ody to lock in p