. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL PREFILTER CARTRIDGE WARNING installed to the bottom of filter sure to replace the O-ring Cap (A) acts to prevent the entry of dirt or dust into the filter cartridge. 4 - 53 I mmediately after the engine is stop ped, the parts are at high temperature. Do not replace the filter i mmediately. Wait for the t emperature of all parts to go down. e engine fuel piping system when the engine is running. H igh pressure is generated inside th r When replacing the filter, wait for a t least 30 seconds after stopping the engine to let the internal pressure go down before eplacing the filter. D o not bring any fire or flame close.
NOTICE Genuine Komatsu fuel filter cartridg es use a special filter that has highly efficient filtering ability. When replacing the filter c artridge, always use a genuine Ko matsu part. T he common rail fuel injection syst em used on this machine consists of more precise parts than t he conventional injection p I s ump and nozzle. f any part other than a genuine Kom atsu filter cartridge is used, dust or dirt may get in and cause pr oblems with the injection ystem. Always avoid using substit ute parts. When carrying out inspection or ma intenance of the fuel system, pay more attention than normal to the entry of dirt. If dirt is s tuck to any part, use fuel to wash i t off completely.
Prepare a filter wrench and a co When replacing the fuel main filter cartridge (1000 hours), replace the fuel prefilter cartridge 1. Place a container under the fu 2. fuel. Turn water separator cup (2) 3. cartridge (1) to the left and rem Using a filter wrench, turn filter 4. to remove it. Install cup (2) removed before prefilter cartridge. (At this time with new one.) Tightening torque of cup: 1 5. Clean the filter head. NOTICE When filling the filter cartridge with fuel cap Cap (A) fitted. (A) acts to prevent the entry of dirt 6. Fill the filter cartridge with clea 7. (B) in the new filter cartridge. Coat the packing surface of th 8.
Remove cap (A) from the filter cartridge, then install the filter cartridge to the filter head.