. MAINTENANCE SERVICE PROCEDURE LUBRICATING PARKING BRAKE WARNING parking brake from being in the slack adjuster. NOTICE Do not use air pressure or oil pressure to carry out high-pressure greasing. REMARK Removing fitting (1) makes it possible to release the abnormal internal pressure created by excessive greasing. 7. If no grease comes out, install fitting (1). 4 - 67 When carrying out ma intenance, raise the bra ke oil pre ssure suffi ciently to prevent the parking brak e from being automatically applied. In addition, h ang a warning tag that can be se en clearly t o prevent any other person from o perating the parking brake switch. Do not get any oil or grease on the brake dis c or pad 1.
Stop the machine in a flat place and p ut the bl ocks unde r the tires to prevent the mac 2. Raise the dump b ody and secure it in position with the b ody pivot pin. sufficiently to prevent the pa 3. Before starting op erations, raise the b rake oil pressure automatically app lied, and check that t he brak e pressure caution lamp is not lighted u 4. Release the parki ng brake and stop th e engin 5. Using a grease pu mp, pump in grease through fittings (1 (2) (2 places) in th e parking brake body and fitti ng (3) (1 p 6. After completing t he greasing operatio n, remo ve fitting ( If grease comes o ut, wipe off all the gr ease th at comes 8. Check the brakin 4-50)". g capacity.
For details, see "CHECK BRAKING CAPACITY OF PARKING BRAKE (PAGE 9. If the machine mo ves when the braking capacit y is check ed, adjust the parking brake. F or details, see "ADJUST PARKING BRAK E (PAGE 4-37)".