Komatsu — METHOD OF USING ACCURATELY

. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER HM 6 - 6 5. METHO D USING LOADING MODE oading mode (including external display lamp) tained, the more accurate a measurement can be obtained. To obta The Carr be p Whe Do n Whe 1) If th acc 2) If th pay bar If th is s flas 3) If al load 4) If er unti 5) Wh Wh com To obta in an accurate value using the l oading mode (including external d ispl ay lamp) The better the loading place is main tained, the more accurate a measure ment can be Carr y out the work in a place where the grade is within ±5°.

If the grade is more than ±5 the accuracy will 4) If er ror code "F-FL" is displayed, driv l "F-FL" goes out, then stop the 5) Wh en moving the machine, set the en stopping the machine, wait f pletely, then shift the gear shift Whe n loading, use the parking brak e. Release the foot brake or retarder Do n ot start loading until the machin Whe n the equalizer bar is in contact 1) If th e equalizer bar is in contact urate measurement cannot be o 2) If th e machine is stopped empty at load meter-HM detects contact and stopper. e equalizer bar contacts the sto hown on the display and all the 6. DOWNLOADING es in memory.

(Normally, enough for more than 1 month's work) The pay load meter can store 2900 cycl es in memory. (Normally, enoug h for more than 1 month's w ork) If the da ta in memory exceed 2900 cyc les, the newest data are written o ver the oldest d ata and ar e saved in memory . Before operating and saving, download the data to a PC, then clea r the data.