Komatsu — DETAILS OF DATA STORED IN MEMORY OF PAYLOAD METER

. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER HM ENGINE ON/OFF DATA (MT: Metric Ton; ST: Short Ton) *1: Every time the engine is switched ON, the engine operation No. advances by one, and is recorded. The engine operation No. in the cycle data and the engine operation No. in the problem/warning data, which are recorded from the time the engine is switched ON to the time it is switched OFF, are all recorded as an equal value. As a result, when using a personal computer later to compile the data, it is possible to determine what time during the engine operation the cycle data or system problem refers to. 6 - 15 The data are saved t o RAM both when the engine is st arted and when it is stopped.

The maximu m limit fo r saving engine ON/OFF data is 1 15 ON/OFF sets. If the data in memory exceed 115 sets, the newest d ata are written over the oldest data. If more than 105 sets are saved i n memory (space for 1 0 sets remaining), error code "E:FUL" is displayed. If error cod e "E:FUL " is displayed, download the data to a PC, then clear the data Item Unit Range Engine operation No.

Year (last 2 digits) Month Day Time Hour Time Min Integer Year Month Day Hour Minute 1 - 65535 0 - 99 1 - 12 1 - 31 0 - 23 0 - 59 Consecutive numbers for engine operation (*1) Shows when engine was switched ON Year (last 2 digits) Month Day Time Hour Time Min Year Month Day Hour Minute 0 - 99 1 - 12 1 - 31 0 - 23 0 - 59 Shows when engine was switched OFF Total payload Overall number of cycles MT or ST Times 0 - 9999000 0 - 9999 Total payload from time engine was switched ON to time engine was switched OFF