Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS PARKING BRAKE SWITCH WARNING This switch (8) is used to actuate and release the parking brake valve. see 3 - 35 When p arking or leaving t he machine, alway s apply t he pa rking brak (a): Pa e parking brake i (b): Tra e parking brake i When t he switch is set t o the PARKING position , the parkin pilot la mp lights up. When t he switch is set lever is at any position other than N, the centra l warning lamp flash a nd the alarm buz zer will sound. If the p ressure in the br ake circuit drops (below 5.4 MPa {55 k g/cm2 applied . For details of the method of c ancelin brake, ACTUATED IN EMER GENCY (PAGE 3-130)".

PSI}), the parking brake is automatically "WHE PARKING BEEN When t he lamp switch i s turned ON, the icon in side the switc h lights up, regardless of th e position o f the sw itch. REMAR K ngine is stopped with the parking brake switch at TRAVEL, the parking brake will be applied automatically If the e ngine is stopped with the parkin g brake switc h at he parking brake wil applied automatically even th ough the parkin g brake switch i s at TRAVEL . When startin g the engine again, operate the parking brake switch to PARKING, an d then move it b ack to TRAVEL to release t he parking b rake. NOTICE During l oading operations , do not apply the parking brake . Apply the retarde r brake.