. OPERATION EXPLANATION OF COMPONENTS freely (a): AUTO position For normal operations (b): LOW position When fine control of the machine is needed, such as when putting it into a garage. Regardless of the position of the switch, when the differential lock is pilot lamp lights up. FOG LAMP SWITCH (If equipped) This switch (11) is used to switch on the fog lamp. (a): Fog lamp goes out (b): Fog lamp lights up When the lamp switch is turned ON, the icon inside the switch lights up, regardless of the position of the switch. 3 - 36 AISS LOW SWITCH Using this switch (9), it i s possible to switch the AISS between AUTO and LOW. Use each position as follows. If the switch is at AUTO po sition:
When the machine is sto pped, if the parking brake or retarder brake are actuated, t he idlin g speed is automatically adjusted to low speed. automatically adjusted to When the parking brake is released and the machine is moved off, the speed is high speed. he ove The water temperature i s detected, and when it is at low temperature , the idle is automatically adjusted to high speed to reduce the war ming-up time. When the lamp switch is tu rned ON, the icon inside the switch lights up, regardless of the position of the swi INTER-AXLE DIFFERENTIAL L OCK SWITCH This switch (10) can be use d to switch the actuating conditions for the inter-axle differential lo ck.
When this switch is presse d, the system is switched to MANUAL. When the switch is not p ressed or is pressed to return it, the O. the system is switched to AUT AUTO: The slippage of the front axle is detected and the inter-axle differential lock is a utomatically actuated. MANUAL: When the gear s hift lever is at the F3, F2, F1, N, R1 , or R2 position, the inter-axle differential lock is actuated. lock is ctuated, the When the lamp switch is tu rned ON, the icon inside the switch lights up, regardless of the position of the swi For details when using the differential lock, see "OPERATION USING OCK (PAG