. OPERATION EXPLANATION OF COMPONENTS be selected with this lever (3) to match the 3 - 41 ACCELERATOR P Use thi s pedal (2) to control the engine speed It can b e operated freely from lo w idling to full GEAR SHIFT LEVE The ge ar range c travel c onditions. Positio n D: used when traveling normally. When this position is used, This is used when traveling nor his position is used, the tra nsmission is set automatically betwe en the 2nd t orque convert er drive an d 6th gear ac cording to the travel speed. While the dum p body is r aised, howev er, the transm ission is fixed to the 2nd ge ar and is no t changed. K eep the dump body lowered during travel.
The maxim um travel speed in this position is 58.6 km/h (36.4 M PH). REMAR K achine is driven when the dump body is not completely If the m lowered , if the gea r shift lever i s at position D , the speed ra nge is fixed a t 2nd and the transmission cannot be shifted. (This .3).) conform s to EU sa fety standard (EN474-6 5.1 Positio n R1: This is used when traveling in r everse. When this position is used , the transmission is fixed i n R1 and the tra vel is carried out in torqu e converter d rive or direct d rive according to the travel speed. The maximu m travel speed i n this position is 7.6 km/ h (4.7 MPH). Positio This is used when traveling in r everse.
When this position is used , the transmission is fixed i n R2 and the tra vel is carried out in torqu e converter d rive or direct d rive according to the travel speed. The maximu m travel speed i n this position is 18.1 km /h (11.2 MPH The ma chine cann ot be driven i n reverse if th e dump body i s raised. Lower the dump body, set the dump lev er to FLOAT , then oper ate the gear shift lever to R