. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS The shift hold function can be canceled by carrying out the following operations. 1) When the gear shift lever is operated to another position. 2) When the shift hold switch is pressed again. DUMP LEVER CAUTION This lever (4) is used to operate the dump body. (a) RAISE (b) HOLD: The dump body stops and is held in position. (c) FLOAT: The dump body moves freely under external force. (d) LOWER Always set to the FLOAT position when traveling. It is impossible to travel in reverse if the dump body is raised. (PAGE 3-87)".
3 - 43 When moving the shift lever fr om the N (neutral) position to the R1 (reverse) position or from the N position to the D position, press the lock button on the shift lever b When the shift hold switch is pressed, the shift hold function is ot lamp lights up. is actuated, the transmission is not nsmission speed. actuated and the shift hold pil When the shift hold function shifted up from the present tra To prevent damage to the dump body caused by vibration from the road, always lower the dump body whe n traveling and set the dump lever to the FLOAT position. If the engine stops, the dump b ody is held in the HOLD condition, regardless of t he pos ition of the dump lever.
When the engine is started again, th e dump body is held in the HOLD condition an d the body pilot lamp li ghts up . For DUM CONDITION