. MAINTENANCE SERVICE PROCEDURE 4 - 64 EVERY 4000 HOURS SERVICE Maintenance for every 50, 100, 2 50, 500, 1 000 and 200 0 hours service should be carried o LUBRICATING Carry out the greasing onc e ever y two years, regardless of w hether the 4000 hour interval 1. Set th e grease fitting marked by arrow s on the f ront drive shaft facing down. 2. Using a grease pump, pump i n grease through the g reas e fittings marked by the arrow 3. After greasing, wipe off any ol d grease that was pushed out (1) Cente r drive shaft spline (1 pla (2) Front drive shaft (2 (3) Rear d rive shaft (2 (4) Cente r drive shaft ( 2