. MAINTENANCE SERVICE PROCEDURE CHECK WATER PUMP CHECK AIR CONDITIONER COMPRESSOR, ADJUST CHECKING FOR LOOSENESS OF HIGH-PRESSURE CLAMP, HARDENING OF RUBBER CHECKING FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER 4 - 65 Check that there is no play in the p ulley or any grease leakage, water leakage, o r clogging of the drain hole.
If any problem is found, contact your Ko matsu distributor for disassembly and repair or (Machine equipped with cab) (If eq As special tool is required for chec king and adjusting the parts, request Komatsu distributor for servic REPLACE INJECTOR ASSEM As k your Komatsu distributor to ca Check visually and touch with you r fingers to check that there are no loose bolt s or hardening of rubber p arts at clamps (1) to (4). If there is any lo oseness or hardened rubber , contact your Ko matsu distributor for r eplacement. Check if any of fuel spray preventio ncaps (1) through (12) is missing, or if any part of the rubber is hardened.
If either of t he cases is found, call your Ko matsu distributor for the installation or replace ment.