TRANSPORTATION When loading or unloading, always use ramps or a platform and carry out the operation as follows. LOADING 1. Load and unload on firm level ground only. Maintain a safe distance from the edge of a road. 2. Properly apply the brakes on the trailer and put blocks un- der the tires to ensure that the trailer does not move. Make the slope of the ramps a maximum of 15°. 3. Run the engine at low speed. (A): Low idling 4. Check that the travel speed boost monitor is off. If the monitor is on, the speed is set to high speed travel, so press the travel speed selector switch. The monitor goes out and the speed is shifted to low speed travel.
135 Ramp Blocks Distance Max15 between Block ramps RYA00670