TRANSPORTATION 5. When loading, set the work equipment at the front and the blade at the rear, with the undercarriage and upper struc- ture set parallel. 6. Before moving onto the ramps, make sure that the ma- chine is positioned in a straight line with the ramps and that the centerline of the machine matches that of the trail- er. Align the direction of travel with the ramps and travel slowly. Lower the work equipment as far as possible without causing interference. When on the ramps, operate only the travel lever. Do not operate any other lever. 7. Stop the machine at the specified place, then swing the upper structure slowly 180°. 8.
Load the machine at the specified position on the trailer or truck. 136