D 2008/2009 Drive system W 02-09-03 Removing the big end bearing cap z Position lifting bearing journal in LDC position. z Unscrew screws (1). z Remove big end bearing cap (2). z Remove bearing shell (3). Lay out components in the order in which they should be installed. Note order of cylinders. 3 2 1 6 © 41041-0 z Press out the piston and connection rod. Lay out components in the order in which they should be installed. Note order of cylinders. z Remove con rod bearing shells (1). z Visually inspect the components. 1 © 41043-1 Removing the piston z Remove locking ring with locking ring pliers. z Press piston bolts out of piston and con rod. z Remove connection rod.
z Visually inspect the components. © 41044-1 © 02/2006 6002-001 2/6