D 2008/2009 Drive system W 02-09-03 z Remove piston rings with universal piston ring pliers. z Check piston. W 02-09-07 6 © 41045-0 Completing con rod and piston z Insert new locking ring. Ensure that the installation location is free from faults. z Insert con rod. The labelling on the piston base and the numbered label of the connection rod face the camshaft side. z Oil the piston bolt lightly. z Press the piston bolt through. z Insert new locking ring. Ensure that the installation location is free from faults. © 41047-1 Installing the piston and con rod z Insert bearing shell in the con rod. Note the assignment of the bearing shells. The anti-rotation lock (1) must lock in groove (2).
z Insert bearing shell in the respective big end bearing cap. Note the assignment of the bearing shells. The anti-rotation lock must lock in groove. 2 ? 1 © 41048-1 © 02/2006 6002-001 3/6