13. TRANSPORTATION 13.6 INSTALLATION OF CAB (MACHINES EQUIPPED WITH CAB) Install the cab parts in the opposite order to removal. Connect all parts that were disconnected. Install the cab mounting bolts as follows. 1. Lower the cab slowly on top of the floor frame. 2. Align the cab with the floor frame, then install bolts and washers in holes A U . Do not screw the bolts in fully. Screw them in 3 or 4 turns. 3. Tighten the bolts in holes N U fully. Tighten in the order N , U , Q , R , O , T , P , S . 4. Tighten bolts A M fully. 2-78