OPERATOR'S STATION WIPER/WASHER SWITCH The wiper and the window washer are operated using the wiper/washer switch. Fast Wiper Turn the wiper/washer switch to the specified position to operate the wiper. Slow Mid OFF Position: The wiper stops and is retracted. INT Position: The wiper operates intermittently at the interval selected by the switch position as described below. INT (Slow): The wiper operates at 8-second interval. INT (Mid): The wiper operates at 6-second interval. INT (Fast): The wiper operates at 3-second interval. M178-01-016 ON Position: The wiper operates continuously. Wiper NOTE: (1) When the front window (upper) is opened, the wiper and washer will not operate.
Even if the front window (upper) is closed, the wiper and washer will not operate until the lock pin on the right side is placed in the lock position. If the front window is opened while during operating the wiper, the wiper will be retracted and the washer function is deactivated. (2) In case either the wiper or washer is operated with the front window (upper) opened, or if front window (upper) is opened while operating either the wiper or washer, the front window opening alarm buzzer will sound intermittently at one-second intervals. Close the front window (upper). Washer (Std. Model) Press and hold the wiper/washer switch to squirt washer fluid onto the front window.
When the wiper/washer switch is pressed for more than 2 seconds, the wiper operates un- til the switch is released. When the wiper/washer switch is released, the wiper automatically retracts. While operating the wiper in the INT mode, when the wiper/washer switch is pressed, the wiper operation mode is changed to the con- tinuous operation mode. M1U1-01-018 IMPORTANT: Washer motor may be damaged if wiper/ washer switch is held for more than 20 sec- onds, or continually operated with no fluid in the washer tank. 1-50