OPERATOR'S STATION AM/FM RADIO OPERATION Controls on the radio 1- Power Switch/Volume Control Knob 4 7 2 2- Tone Adjustment Ring 3- AM/FM Switch 4- Station Presets 5- Tuning Switches 6- Display Mode Change Switch 7- Digital Display 8- Time Set Switches M1G6-01-026 3 6 8 5 1 Tuning Procedure • Manual Tuning Procedure Repeatedly tap one of tuning switches (5) until the de- sired station is reached. Each time the tuning switch is pressed, the frequency changes at an interval. Tap the tuning switch [UP] ( ) to increase the fre- quency. ) to decrease the frequency.
Tap the tuning switch [DOWN] ( • Automatic Search Function Press and hold one tuning switch (5) for more than half a second, then release. The frequency display will move up to the next higher frequency station. To go up to the next higher frequency station, press and hold the tuning switch [UP] ( M1G6-01-026 5 ). To go down to the next lower frequency station, press and hold the tuning switch [DOWN] ( ). In order to deactivate the automatic search function while it is operating (while searching the next available frequency station), simply tap tuning switch (5) again. If the receiving radio waves are weak, i. e.
such as when the machine is located between high rising buildings, etc., use the manual tuning procedure to select the desired station. 1-69