OPERATING THE MACHINE ATTACHMENT PEDAL (COMMON USE TYPE) IN THE UNLOCK POSITION This pedal is a seesaw type and commonly used to operate a breaker and a crusher. 1. Select “BREAKER” on monitor work mode screen (3). Refer to “Work mode” on page 5-11 for work mode-set opera- tion. 3 2. Tilt pedal lock (2) forward to unlock the pedal. 3. Press attachment pedal (common use type) (1) forward to operate the breaker. WARNING: Unless stopper bolt (7) is not in contact with brecket (8), attachment pedal (common use type) (1) may fall back, causing hydraulic oil to flow in reverse. Failure of the breaker may result. 4.
When attachment pedal (common use type) (1) is re- leased, the breaker stops operation. T1V5-05-01-109 5. When not required to operate attachment pedal (com- mon use type) (1), place pedal lock (2) in the LOCK posi- tion. 1 8 7 2 Attachment pedal (common use type) in the UNLOCK position M1J1-13-003 1 8 2 7 Attachment pedal (common use type) in the LOCK position M1J1-13-002 5-5