Maintenance Turn off the battery cut-off switch if your boat has one. EMU30661 Removing propeller Do not use your hand to hold the propeller when loosening or tightening the propeller nut. Put a wood block between the anti-cavi- tation plate and the propeller to prevent the propeller from turning. EMU29197 Spline models 1. Straighten the cotter pin and pull it out using a pair of pliers. 2. Remove the propeller nut, washer, and spacer (if equipped). WARNING! Do not use your hand to hold the propel- ler when loosening the propeller nut. [EWM01890] Checkpoints ZMU01897 Check each of the propeller blades for wear, erosion from cavitation or ventila- tion, or other damage. 1. Cotter pin 2.
Propeller nut 3. Washer 4. Spacer 5. Propeller 6. Thrust washer Check the propeller shaft for damage. Check the splines for wear or damage. Check for fish line tangled around the pro- peller shaft. 3. Remove the propeller, washer (if equipped), and thrust washer. EMU30671 Installing propeller EMU29233 Spline models ECM00500 Be sure to use a new cotter pin and bend the ends over securely. Otherwise the propeller could come off during opera- tion and be lost. NOTICE Check the propeller shaft oil seal for dam- age. 1. Apply Yamaha marine grease or a cor- rosion resistant grease to the propeller 64