Yamaha Motor Corporation, USA 115TR — Maintenance

Maintenance EMU29322 Checking battery (for electric start models) ing, consult your Yamaha dealer. 3. Check the battery connections. They should be clean, secure, and covered by an insulating cover. WARNING! Bad connections can produce shorting or arcing and cause an explosion. EWM01900 WARNING Battery electrolytic fluid is poisonous and caustic, and batteries generate ex- plosive hydrogen gas. When working near the battery: [EWM01910] EMU29333 Connecting the battery Wear protective eye gear and rubber gloves. EWM00570 Do not smoke or bring any other source of ignition near the battery. Refer to page 14 for detailed safety infor- mation about batteries.

Mount the battery holder securely in a dry, well-ventilated, vibration-free loca- tion in the boat. Install a fully charged bat- tery in the holder. WARNING The procedure for checking the battery var- ies for different batteries. This procedure contains typical checks that apply to many batteries, but you should always refer to the battery manufacturer’s instructions. ECM01123 NOTICE Reversal of the battery cables will dam- age the electrical parts. ECM01920 NOTICE 1. Make sure the main switch (on applica- ble models) is “ ” (off) before working on the battery. 2. Connect the red battery cable to the POSITIVE (+) terminal first.

Then con- nect the black battery cable to the NEG- ATIVE (-) terminal. A poorly maintained battery will quickly deteriorate. 1. Check the electrolyte level. 2. Check the battery’s charge. If your boat is equipped with the digital speedome- ter, the voltmeter and low battery alert functions will help you monitor the bat- tery’s charge. If the battery needs charg- 1. Red cable 2. Black cable 3. Battery 3. The electrical contacts of the battery and 67