OM4006.1 06/98 Maintenance - Section 4 Lubrication and Service Page 4-9 EVERY 2000 HOUR SERVICE Truck Serial Number ____________________________ Site Unit Number ______________________________ Date:______________Hour Meter_________________ Serviceperson Name___________________________ Maintenance for every 250, 500 and 1000 hours should also be carried out at this time. 1. STEERING, BRAKE & COOLING OIL TANK Drain oil from tank and refill tank to specified level, capacity 576 liters (152 U.S. gal.). Refer to ‘‘Lubrication Chart’’ for type of oil to use. Lube key ‘‘C’’. Refer to ‘‘Hydraulic Tank Service’’, page 4-10 . 2.
FINAL DRIVE CASE Position machine so that casting line is horizontal and drain plug is at the bottom. Drain oil and reinstall plug, remove fill plug at castline and fill to specified level. This operation is performed on the right and left hand final drives. Capacity is 240 liters (63.5 U.S. gal.) each side. Refer to ‘‘Lubrication Chart’’ for type of oil to use. Lube key ‘‘B’’. 3. DIFFERENTIAL CASE Drain oil from differential and refill to the specified level: capacity = 300 liters (79 U.S. gal.) . Refer to ‘‘Lubrication Chart’’ for type of oil to use. Lube key ‘‘B’’. 4. ENGINE VIBRATION DAMPER Inspect damper for cracks or separation on rubber surfaces.
If any defects are noted, replace with new vibration damper. Refer to shop manual, Section ‘‘C’’, Engine and Cooling System. Notify the proper maintenance personnel, if any discrepancies are found. COMMENTS √’d INITIALS