Operator Cab and Controls - Section 32 3/10 OM3216 Page 32-32 The filter and oil replacement time is displayed on the character display for items needing maintenance. If a filter and/or oil have been replaced, reset the filter and oil change time. Resetting The Filter/Oil Replacement Meter 1. Beginning at the service meter, press the ( ) portion of mode select switch 1 to display the operation information. Press (>) or ( select switch 2 until MAINTENANCE MONITOR is displayed. 5. When resetting the replacement time, press (>) or ( sor with YES, then press ( ) on mode select switch 1. It will reset and return to the previous screen.
To abandon, align the cursor with NO, then press ( ) on mode select switch 1. To reset the replacement time for another item, repeat this process. After all items are reset, press ( ) on mode select switch 1 twice or turn the key switch to OFF to exit. 2. Press the ( ) portion of mode select switch 1. The display will show a component, the replace- ment time and the number of times it has been changed. For the following display the fuel filter replacement time is 500 hr. The filter has been replaced 9 times. Inputting Telephone Numbers 1. Beginning at the service meter display, press the ( ) on mode select switch 1 to display the operation information. 2. Press (>) or ( scroll to TEL. 3.
Press (>) or ( play the item to be reset. 4. When the correct item is displayed, press the ( ) portion of mode select switch 1. The display will change to the reset display. The top line dis- plays Reset and Item to be reset alternately.