OM3216 3/10 Operator Cab and Controls - Section 32 Page 32-33 3. Press ( ) on mode select switch 1. This will change to the telephone input display. Up to 12 digits can be displayed for the telephone num- ber. Input from the first digits. 4. The cursor is displayed at the input position. Press (>) or ( scroll through numbers 0-9. To leave a blank, select *. When the correct digit is displayed, press ( ) on mode select switch 1. The cursor will advance to the next position. Repeat the input process until all digits have been entered. At the last digit, press ( ) on mode select switch 1 to input another telephone number.
If there is a mistake in the input or the input is to be stopped, press ( ) on mode select switch 1 to return to the previous screen. When complete, press ( ) on mode select switch 2 twice to exit or turn the key switch to OFF. All input telephone numbers will be dis- played next time this display is accessed. Selecting A Language This function can be used to change the default lan- guage for the character display. 1. Beginning at the service meter display, press the ( ) on mode select switch 1 to display the operation information. 2. Press (>) or ( scroll to the LANGUAGE display. then return to the previous screen.
If the desired language has been set, press ( ) on mode selector switch 2 twice or turn the key switch to OFF to exit. 3. Press the () on mode select switch 1. current default language is displayed. The 4. Press (>) or ( 2 m to lan an 5. Press the () on mode select switch 1 to a cti