1. Left Button - Shifts top display through speedometer, RPM, and clock. NOTE: An item can only be dis- played in this position if it is not already being displayed in the top display. To set the clock when the clock is in this position, press and hold the Middle Button; then use the procedure found in 4. 2. Middle Button - Shifts middle display through speedometer, RPM, clock, odometer, trip 1, trip 2, and engine hours. 6. Coolant Temperature/Battery Volt- age/Intake Air Temperature/Fuel Level Display - Displays coolant tem- perature, battery voltage, intake air temperature, and fuel quantity. Press the Right Button to change which parameter is being displayed.
Press and hold the Right Button to see the actual values associated with the mode selected. 3. Right Button - Shifts bottom display through coolant temperature, battery voltage, intake air temperature, and fuel level. 4. Speedometer/Tachometer/Clock Dis- play - Indicates approximate vehicle speed in MPH or KM/H when speed- ometer function is selected, RPM when tachometer function is selected, or time when clock is selected. Press the Left Button to change which parameter is being displayed. With speedometer selected, press and hold the Left Button to shift between stan- dard (MPH/miles/Fahrenheit) and metric (km/h/kilometers/Celsius).
CAUTION Continued operation with high engine temperature may result in engine damage or premature wear. NOTE: High engine RPM, low vehicle speed, or heavy load can raise engine temperature. Decreas- ing engine RPM, reducing load, and selecting an appropriate transmis- sion gear can lower the tempera- ture. With the clock mode selected, press and hold the Left Button to set the clock. The option of selecting the 12- hour or 24-hour clock is available; press the Left Button to alternate between the two modes. Next, press the Middle Button to set the clock. Press the Left or Right to set the hours; then press the Middle Button to set the minutes.
Press the Left or Right Button to set the minutes. When the proper time has been set, press the Middle Button to return to the main gauge display. NOTE: Debris in the engine com- partment (or packed between the cooling fins of the radiator) can reduce cooling capacity. Using a garden hose, wash the radiator and the engine to remove any debris preventing air flow. 5. Engine Hour Meter/Odometer/Trip Meter/Speedometer/Tachometer/ Clock Display - Displays engine hours, odometer, trip meter, speedom- eter, tachometer, or clock. Press the Middle Button to change which parameter is being displayed. The Engine Hour Meter and Odometer cannot be reset.
To reset the trip meter, select the Trip Meter; then press and hold the Middle Button until the trip meter display reads 0. CAUTION Arctic Cat does not recommend using a pressure washer to clean the radiator core. The pressure may bend or flatten the fins causing restricted air flow, and electrical components on the radiator could be damaged. Use only a garden hose with spray nozzle at normal tap pressure. 7. Gear Position Indicator - Indicates which gear is selected. 8. Differential Lock Indicator - Displays LOCK when the differential lock has been engaged. NOTE: The engine hour meter will not activate until engine speed exceeds 500 RPM. 30